MinimServer

Home

Features

MinimServer 2

License options

Starter Edition

Downloads

Release notes

Quick start

MinimWatch

User guide

Support

Troubleshooting

Forum

MinimStreamer

License terms

UPnP AV

Technology

Contact

Latest news

(2020/10/08) MinimServer 2 is now available for Synology, QNAP, Windows, Mac, Linux, Melco, ASUSTOR and ReadyNAS

Latest change

MinimServer 2.0.16 has been released

[NEW] MinimServer 2 has replaced MinimServer 0.8 on all platforms for new installations. If you have an existing installation of MinimServer 0.8, you can continue to use it with some limitations. See the MinimServer 2 page for details.

Download links for MinimServer 0.8 have been removed from this website. The MinimServer 0.8 packages in the Synology, QNAP and ASUSTOR package repositories will be updated to MinimServer 2 soon.

There are important differences between MinimServer 2 and earlier versions of MinimServer. Some features that were available free of charge in earlier versions of MinimServer require payment of a license fee in MinimServer 2. For details, see the License Options page.

MinimServer 2 Quick Start for ReadyNAS

This page provides basic information for installing MinimServer 2 on a NETGEAR ReadyNAS, getting up and running and performing some common tasks. If you have any questions about using MinimServer 2, please post them to the MinimServer forum.

Installing MinimServer 2

You can install MinimServer 2 on the ReadyNAS NV+ v2, Duo v2, Ultra, Pro and NVX. There isn't an installation package for the current ReadyNAS series (models 102, 104, 212, 214, 312, 314, 316, 422, 424, 426, 428, 516, 524, 526, 528, 626, 628 and 716).

To install MinimServer 2 on a ReadyNAS NV+ v2, Duo v2, Ultra, Pro and NVX, do the following:

  1. Follow the instructions on the Installing MinimServer 2 on a NETGEAR ReadyNAS page. You don't need to uninstall your current version of MinimServer before installing the new version.
  2. When you first start MinimServer 2 after upgrading from MinimServer 0.8.5, some of your property settings from MinimServer 0.8.5 might not be active or shown in MinimWatch 2. This is because you are running MinimServer 2 Starter Edition, which has limited configurability. Your previous property settings will be enabled automatically when you activate a free 30-day trial of the full version of MinimServer 2 or when you purchase and activate a MinimServer 2 full license.
  3. When you first start MinimServer 2 after upgrading from MinimServer 0.8.5, MinimStreamer will not be installed. If you want to use MinimStreamer, you need to install MinimStreamer 2 by following the instructions in the Installing MinimStreamer section. Your previous MinimStreamer property settings will be migrated automatically.
  4. To activate a free 30-day trial of the full version of MinimServer 2, open the MinimServer 2 configuration page in a web browser by clicking on the MinimServer icon in the DSM main menu. After clicking through the License page and Welcome page, select the License tab and follow the instructions there.
  5. For information about purchasing a MinimServer 2 full license, see this page. After purchasing the license, you need to activate it on your ReadyNAS. To do this, open the MinimServer 2 configuration page as described above, select the License tab and follow the instructions there.

Configuring and managing MinimServer 2 settings using MinimWatch 2

To configure MinimServer 2 settings using MinimWatch 2, do the following:

  1. Install the MinimWatch 2 application on another computer on your local network (Windows, Mac or Linux). You need to use MinimWatch 2 because previous versions of MinimWatch are not compatible with MinimServer 2. MinimWatch 2 is compatible with MinimServer 2 and also with previous versions of MinimServer. For details of how to download and install MinimWatch 2, see the MinimWatch page.
  2. For details of how to use MinimWatch, see the Running MinimWatch section.
  3. For a list and descriptions of the available property settings, see the Properties reference section.
  4. Some MinimServer properties cannot be configured in Starter Edition (see the Starter Edition page). These properties are set to default values when you install MinimServer 2 and are greyed out in MinimWatch 2. To configure these properties, you need to either activate a MinimServer 2 free 30-day trial or purchase and activate a MinimServer 2 full license (see above). MinimWatch 2 does not require a license.
  5. When you activate a MinimServer 2 free 30-day trial or full license, your saved configuration settings from MinimServer 0.8.5 will be restored automatically and will be visible in the MinimWatch 2 Properties window. You can then make changes to these settings if you wish.

Using the MinimServer 2 configuration web page

To use the MinimServer 2 configuration web page, do the following:

  1. Open the MinimServer 2 configuration page in a web browser by typing https://x.x.x.x:9790 into the browser address bar, where x.x.x.x is the IP address of the ReadyNAS. If you are running MinimWatch 2 (see above), you can open the MinimServer 2 configuration page by selecting Configure from the minim icon pop-up menu.
  2. After accepting the click-through license and reading the Welcome page, you will see the Status page. This shows the current status of MinimServer 2 and provides License and Profiles tabs for further configuration options.
  3. The configuration web page does not currently allow all MinimServer property settings to be viewed and changed as is possible from MinimWatch 2. The configuration web page will be enhanced to support this in a future version of MinimServer 2.

Checking the current status of MinimServer

To check the current status of MinimServer, do the following:

  1. Open the MinimServer configuration page as described in the previous section. This page shows the current status of MinimServer as well as any notification messages.
  2. Altenatively, if you are using MinimWatch on another computer to manage MinimServer (see above), you can use the MinimWatch minim icon to see the status of MinimServer. If you are running MinimWatch on Windows, the minim icon is a small musical note in your Windows system tray (taskbar notification area). You night need to view the icon overflow area (click the upward-pointing arrow) to see this icon. If you are running MinimWatch on Mac or Linux, the minim icon appears in the menu bar.
  3. Hover your mouse pointer over the minim icon.
  4. The minim icon will display a message showing the current state of MinimServer. On some versions of Linux, you need to click the minim icon instead of hovering the mouse pointer over it.

Rescanning your library after adding or removing music

To rescan your library after adding or removing music, do the following:

  1. Right-click the minim icon (see above) and select Rescan.
  2. Alternatively, click the Rescan button on the MinimServer 2 configuration web page (see above).
  3. While the rescan is in progress, MinimServer is not visible to UPnP control points. If you are playing music from MinimServer when the rescan starts, the music will continue to play during the rescan.
  4. You can check the current status of MinimServer (see above) to see when the rescan has completed.

Creating and selecting a custom browsing profile

To create a custom (user-configured) profile for browsing your library, do the following:

  1. To do this, you need to have activated a free 30-day trial or a full license (see above).
  2. Configure the property settings that you want to save as a custom profile.
  3. From the MinimServer 2 configuration web page (see above), select the Profiles tab followed by the Create tab.
  4. In the 'New profile' field, type the name of the profile that you want to create, then click the 'Create Profile' button.
  5. The newly created profile will contain your current property settings. It will appear in the list of available profiles and will become your current active profile.

To select a custom (user-configured) profile for browsing your library, do the following:

  1. To do this, you need to have activated a free 30-day trial or a full license (see above).
  2. From the MinimServer 2 configuration web page (see above), select the Profiles tab. The Select tab will automatically be selected below the Profiles tab.
  3. Select any of the available profile choices and click the 'Select Profile' button.
  4. The new profile will be selected and MinimServer will restart. When the restart has completed, the new profile will be active.
  5. You can check the current status of MinimServer (see above) to see when the restart has completed.

Updating MinimServer

To check for and install a new version of MinimServer, do the following:

  1. Right-click the minim icon (see above) and select About, then click the 'Show updates' button. If a new version is available you will see a message telling you this.

    Note: You might see a message saying that an update is available. This is an online update (see below), not a new version. To install the online update, follow the prompts from the About dialog.

  2. Alternatively, view the MinimServer configuration web page (see above) to see if there is a message saying that a new version is available.
  3. To install a new version, follow the instructions on the Installing MinimServer 2 on a NETGEAR ReadyNAS page. You don't need to uninstall the current version before installing the new version.
  4. Some minor updates are installed automatically as online updates when MinimServer starts. For this, the ReadyNAS needs to have internet access.

Viewing the MinimServer log

To view the MinimServer log, do the following:

  1. Right-click the MinimWatch minim icon (see above), and select 'Show log'.
  2. Alternatively, use another computer to open the backup shared folder and view the minimserver.log file.

Installing MinimStreamer

To install the optional MinimStreamer component, do the following:

  1. To install and run MinimStreamer, you need to either purchase and activate a full license or activate a free 30-day free trial. To activate the license or free trial, select the License tab from the MinimServer configuration web page and follow the instructions there.
  2. In MinimWatch 2, select Properties from the minim icon, then select the Packages tab and follow the prompts to install MinimStreamer.
  3. If MinimStreamer is not shown as an available package, this probably means you have not activated a free 30-day trial or full license.
  4. For details of how to do use MinimStreamer, see the MinimStreamer User guide.
  5. Some transcoding settings require FFmpeg to be installed. To do this, download an FFmpeg ARMv5 (armel) static binary, extract the ffmpeg executable file from the downloaded archive and copy the ffmpeg executable file into the ReadyNAS directory /etc/frontview/addons/bin/MINIMSERVER/opt/bin You can download Linux static binaries for FFmpeg from this page.

Stopping and starting MinimServer

To stop MinimServer, click the green MinimServer 2 icon to display the Add-on Manager dialog. Uncheck the box in the top-left corner and click the Save button. If you display the Add-on Manager dialog for MinimServer 2 again, the green dot in the top-right corner has changed to grey to show that MinimServer isn't running.

To restart MinimServer, click the green MinimServer 2 icon to display the Add-on Manager dialog. Check the box in the top-left corner and click the Save button. If you display the Add-on Manager dialog for MinimServer 2 again, the grey dot in the top-right corner has changed to green to show that MinimServer is running.

Help and support

To get help and support, post your question to the MinimServer forum.