MinimServer 2

Home

License options

Downloads

Quick start

Starter Edition

Release notes

Forum

License terms

MinimServer

(2020/05/24) MinimServer 2 is now available for Synology, QNAP, Windows, Mac and Melco (2020/07/17) MinimServer update 161 released

Installing MinimServer 2 on a QNAP NAS

Table of contents

Installing or updating MinimServer 2
QNAP models and processor types
Setting up MinimServer 2
Startup problems
Uninstalling MinimServer 2

The instructions on this page tell you how to install and update MinimServer 2 on all QNAP NAS models except models 109. 209 and 409. For these models, please refer to the instructions on the Installing MinimServer 2 on QNAP NAS models 109, 209 and 409 page.

Installing or updating MinimServer 2

Note: If you are currently running MinimServer 0.8, don't uninstall MinimServer before you install MinimServer 2. If you uninstall MinimServer 0.8, you will lose any MinimServer configuration settings that you've created.

  1. Login to the QNAP QTS desktop and launch the App Center.
  2. Select My Apps and check that the JRE package (not JRE_ARM) is installed. If the JRE_ARM package is installed, remove it. If the JRE package is not installed, select Developer Tools and install it.
  3. Check that the JRE package is enabled (the JRE icon in My Apps should be orange, not grey). If the icon is grey, click Start.
  4. MinimServer 2 isn't yet available in the App Center, so you need to do a manual install. To identify the correct install package to download, find the processor type for your QNAP model by looking at the QNAP models and processor types section.
  5. From the MinimServer 2 Downloads page, download the file MinimServer-2.0.12-intel.qpkg (if your QNAP model has an Intel or AMD processor), MinimServer-2.0.12-arm64.qpkg (if your QNAP model has a Realtek processor), MinimServer-2.0.12-armv7.qpkg (if your QNAP model has an ARMv7 processor) or MinimServer-2.0.12-armv5.qpkg (if your QNAP model has an ARMv5 processor).
  6. Use the App Center "Install Manually" button to install the MinimServer .qpkg file that you downloaded in the previous step. This button is near the top right-hand corner of the App Center window and looks like four small squares overlaid by a + inside a circle.
  7. From My Apps, check that the MinimServer package is enabled (the MinimServer icon in My Apps should be green, not grey). If the icon is grey, click Start.
  8. From My Apps, click the Open button for the MinimServer package. If you get a license dialog, review the license terms and accept them. The MinimServer 2 welcome page should be displayed in your web browser. Click through this page to the MinimServer 2 configuration page.
  9. For information about setting up MinimServer, see the Setting up MinimServer 2 section.
  10. For a brief overview of how to use MinimServer 2 and perform a number of common tasks, see the Quick start for QNAP page.

QNAP models and processor types

If you're doing a manual install of MinimServer, you need to know the processor type for your QNAP model.

The QNAP model numbers with Intel or AMD processors are 239, 251, 253, 259, 269, 400, 411, 439, 451, 453, 459, 463, 469, 470, 471, 473, 509, 559, 563, 569, 639, 651, 653, 659, 669, 670, 671, 673, 677, 682, 809, 839, 851, 853, 859, 863, 869, 870, 871, 873, 877, 879, 880, 882, 1079, 1253, 1263, 1269, 1270, 1273, 1277, 1279, 1280, 1282, 1580, 1582, 1640, 1673, 1679, 1680, 1685, 16489, 1879, 1885, 2479, 2480 and 3085.

The QNAP model numbers with Realtek processors are 128A and 228A.

The QNAP model numbers with ARMv7 processors are 128 (not 128A), 131P, 228 (not 228A), 231P, 231P2, 231+, 431P, 431P2 and 431+.

The QNAP model numbers with ARMv5 processors are 109, 110, 112, 119, 120, 121, 131 (not 131P), 209, 210, 212, 219, 220, 221, 231 (not 231P, 231P2 and 231+), 409, 410, 412, 419, 420, 421 and 431 (not 431P, 431P2 and 431+).

Note: Some of the models in this list have ARMv7 processors but use a version of QTS that requires the ARMv5 version of MinimServer.

Setting up MinimServer 2

  1. If you've followed the installation steps for Java and MinimServer successfully, the MinimServer 2 configuration page should be displayed in your web browser and you should be able to see MinimServer as a UPnP server from a UPnP control point. If not, go to "System Logs" from the QNAP administration page and check whether there's an error message from MinimServer. If the system log doesn't show any MinimServer errors, see the Startup problems section for further suggestions.
  2. The QPKG installer sets the initial content directory to /share/Multimedia or /share/Qmultimedia, depending on your model of QNAP NAS. The content directory is the top-level directory that contains your music files. If the default setting matches the location of your music library, you should be able to browse and play the contents of your music library in a UPnP control point.
  3. If your music files are in some other location, you can use the MinimServer configuration page in your web browser to enter a different content directory location and click the Update button to activate this setting. To find the correct path to enter for the content directory location, open File Station in QTS and right-click on the root folder of your music library. Note the file path shown on the Copy: selection at the top of the menu and use this file path preceded by '/share'. For example, if the File Station menu shows Copy: /My Music, you need to enter /share/My Music.
  4. MinimServer 2 creates a 'MinimServer' shared folder on your NAS) containing various configuration and log files. It's a good idea to check the minimserver.log file in this folder to see if there are any warning or error messages about problems found by MinimServer while scanning your music files. A warning in the log means that MinimServer has found something wrong with a file, but has been able to read the file and make it available for browsing and playing. An error in the log means that MinimServer wasn't able to read the file. If you see a message you don't understand, you can get help by creating a new thread in the MinimServer support forum as described on the Support page.
  5. If you want to install the latest MinimServer updates, add more content directories or change MinimServer configuration settings, you need to install MinimWatch 2 on another computer (Windows, Mac or Linux) on your local network. MinimWatch also provides a convenient way to monitor the status of MinimServer and view the MinimServer log. You can find instructions for installing MinimWatch 2 on the Installing page.
  6. MinimServer will continue to run while the NAS is powered on and will restart automatically when the NAS is restarted.
  7. You can disable MinimServer from the App Center page by selecting My Apps and clicking Stop from the drop-down menu for the MinimServer icon. This stops MinimServer immediately and prevents MinimServer from starting when the NAS is restarted. MinimServer is still installed on the NAS, and you can re-enable it at any time from the App Center page by selecting My Apps and clicking Start for the MinimServer icon.
  8. For a brief overview of how to use MinimServer 2 and perform a number of common tasks, see the Quick start for QNAP page.

Startup problems

If you can't see MinimServer in a UPnP control point after MinimServer has been installed and enabled, here are some suggestions that may be helpful.
  1. If you have a large music library, it can take some time for MinimServer to complete its initial scan. MinimServer won't be visible to UPnP conrol points until this scan has finished. You can check this by going to My Apps and clicking the Open button for the MinimServer package. If this page loads successfully, the Status tab shows the current status of MinimServer (Media server status). If this status is 'starting', MinimServer is still performing its initial scan. This status doesn't refresh automatically after the page has been loaded, so you need to click the 'Refresh status' button to be sure you are seeing the current status.
  2. If the MinimServer configuration page doesn't load, this means MinimServer isn't running. Check the log files in the 'MinimServer' shared folder for any error messages.
  3. If the MinimServer configuration page loads successfully and shows an error message, correct the error if possible and restart MinimServer by disabling MinimServer from the App Center page, then re-enabling MinimServer.
  4. If the MinimServer configuration page loads successfully and doesn't show an error, leave MinimServer enabled and restart the NAS.
  5. If none of these steps has fixed the problem, submit a problem report as described on the Support page. When describing the problem, please say which of the above steps you have tried and what the results were.

Uninstalling MinimServer 2

  1. To uninstall MinimServer 2, go to the App Center page and remove the MinimServer 2 package. This will stop MinimServer if it's running and will uninstall the MinimServer package from the NAS. It will not remove the MinimServer shared folder.
  2. The MinimServer shared folder contains various files used by MinimServer including your MinimServer configuration settings. If you might want to reinstall MiniMServer in the future, you are advised not to remove this folder.
  3. If you are sure that you do not want to reinstall MinimServer in the future, you can remove the MinimServer shared folder and the files that it contains.
[an error occurred while processing this directive]